Trusted Infineon qualityAnalog TMR sensors for highly accurate position detection.Tunneling Magneto Resistive (TMR) technology is offering high sensing sensitivity with a high output voltage so that no internal amplifier – thus the magnetic sensor can be connected directly to the microcontroller without any further amplification. In addition, TMR technology shows a very low temperature drift reducing external calibration and compensation efforts. The TMR technology is also well known for its low current consumption.With the XENSIVTM TLE5501 products, Infineon launched the first angle sensor products based on TMR technology. TMR magnetic sensor TLE5501 is available in two versions TLE5501 E0001(automotive qualified) and TLE5501 E0002 (automotive ASIL).The TLE5501 is a 360° TMR-based angle sensor that detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with Tunneling Magneto Resistance (TMR) elements. These raw signals (sine and cosine) are provided as a differential output signal and can directly be further processed within a microcontroller. The large output voltage of the bridge renders any further signal amplification unnecessary.

Go for Infineon qualityAnalog TMR sensors for highly accurate position detection. Discover our leading solutions for TMR-based sensors.Tunneling Magneto Resistive (TMR) technology is offering high sensing sensitivity with a high output voltage so that no internal amplifier – thus the magnetic sensor can be connected directly to the microcontroller without any further amplification. In addition, TMR technology shows a very low temperature drift reducing external calibration and compensation efforts. The TMR technology is also well known for its low current consumption.With the XENSIVTM TLE5501 products, Infineon launched the first angle sensor products based on TMR technology. TMR magnetic sensor TLE5501 is available in two versions TLE5501 E0001(automotive qualified) and TLE5501 E0002 (automotive ASIL).The TLE5501 is a 360° TMR-based angle sensor that detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with Tunneling Magneto Resistance (TMR) elements. These raw signals (sine and cosine) are provided as a differential output signal and can directly be further processed within a microcontroller. The large output voltage of the bridge renders any further signal amplification unnecessary.

The TLE5309D is a diverse redundant angle sensor with analog outputs. It combines a Giant Magneto Resistance (GMR) sensor for full 360° angle range with an Anistropic Magneto Resistance (AMR) sensor for high precision in a flipped configuration in one package. Sine and cosine angle components of a rotating magnetic field are measured by Magneto Resistive (MR) elements. The sensors provide analog sine and cosine output voltages that describe the magnetic angle in a range of 0 to 180° (AMR sensor), and 0 to 360° (GMR sensor), respectively.The differential MR bridge signals are independent of the magnetic field strength, and the analog output is designed for differential or single ended applications.The output voltages are designed to use the dynamic range of an A/D-converter using the same supply as the sensor as voltage reference. Both sensor ICs are supplied independently by separate supply and ground pins.

The TLE5309D combines a Giant Magneto Resistance (GMR) sensor for full 360° angle range with an Anistropic Magneto Resistance (AMR) sensor for high precision in a flipped configuration in one package. Sine and cosine angle components of a rotating magnetic field are measured by Magneto Resistive (MR) elements. The sensors provide analog sine and cosine output voltages that describe the magnetic angle in a range of 0 to 180° (AMR sensor), and 0 to 360° (GMR sensor), respectively.The differential MR bridge signals are independent of the magnetic field strength, and the analog output is designed for differential or single ended applications.The output voltages are designed to use the dynamic range of an A/D-converter using the same supply as the sensor as voltage reference. Both sensor ICs are supplied independently by separate supply and ground pins.

The TLE5309D is a diverse redundant angle sensor with analog outputs. It combines a Giant Magneto Resistance (GMR) sensor for full 360° angle range with an Anistropic Magneto Resistance (AMR) sensor for high precision in a flipped configuration in one package. Sine and cosine angle components of a rotating magnetic field are measured by Magneto Resistive (MR) elements. The sensors provide analog sine and cosine output voltages that describe the magnetic angle in a range of 0 to 180° (AMR sensor), and 0 to 360° (GMR sensor), respectively.The differential MR bridge signals are independent of the magnetic field strength, and the analog output is designed for differential or single ended applications.The output voltages are designed to use the dynamic range of an A/D-converter using the same supply as the sensor as voltage reference. Both sensor ICs are supplied independently by separate supply and ground pins.

Our TLE5014 magnetic angle sensor family is available as single and dual die products.All sensors out of this family come pre-configured and pre-calibrated as plug-and-play sensors – and are thus easy-to-use. Today, customers can choose between the following interfaces.TLE5014S16(D): SENT/PWM/SPC – SENT preconfiguredTLE5014P16(D): SENT/PWM/SPC – PWM preconfiguredTLE5014C16(D): SENT/PWM/SPC – SPC preconfiguredTLE5014SP16(D): SPIOn top of those protocol options, the sensor configuration can be adapted to any kind of application setup via a programmable E²PROM.TLE5014 magnetic angle sensors meet ISO 26262 ASIL C for the single chip and ISO 26262 ASIL D for the dual chip versions.Therefore, all products are ready for applications with highest functional safety requirements.

Our TLE5014 magnetic angle sensor family is available as single and dual die products.All sensors out of this family come pre-configured and pre-calibrated as plug-and-play sensors – and are thus easy-to-use. Today, customers can choose between the following interfaces.TLE5014S16(D): SENT/PWM/SPC – SENT preconfiguredTLE5014P16(D): SENT/PWM/SPC – PWM preconfiguredTLE5014C16(D): SENT/PWM/SPC – SPC preconfiguredTLE5014SP16(D): SPIOn top of those protocol options, the sensor configuration can be adapted to any kind of application setup via a programmable E²PROM.TLE5014 magnetic angle sensors meet ISO 26262 ASIL C for the single chip and ISO 26262 ASIL D for the dual chip versions.Therefore, all products are ready for applications with highest functional safety requirements.

Our TLE5014 magnetic angle sensor family is available as single and dual die products.All sensors out of this family come pre-configured and pre-calibrated as plug-and-play sensors – and are thus easy-to-use. Today, customers can choose between the following interfaces.TLE5014S16(D): SENT/PWM/SPC – SENT preconfiguredTLE5014P16(D): SENT/PWM/SPC – PWM preconfiguredTLE5014C16(D): SENT/PWM/SPC – SPC preconfiguredTLE5014SP16(D): SPIOn top of those protocol options, the sensor configuration can be adapted to any kind of application setup via a programmable E²PROM.TLE5014 magnetic angle sensors meet ISO 26262 ASIL C for the single chip and ISO 26262 ASIL D for the dual chip versions.Therefore, all products are ready for applications with highest functional safety requirements.

Our TLE5014 magnetic angle sensor family is available as single and dual die products.All sensors out of this family come pre-configured and pre-calibrated as plug-and-play sensors – and are thus easy-to-use. Today, customers can choose between the following interfaces.TLE5014S16(D): SENT/PWM/SPC – SENT preconfiguredTLE5014P16(D): SENT/PWM/SPC – PWM preconfiguredTLE5014C16(D): SENT/PWM/SPC – SPC preconfiguredTLE5014SP16(D): SPIOn top of those protocol options, the sensor configuration can be adapted to any kind of application setup via a programmable E²PROM.TLE5014 magnetic angle sensors meet ISO 26262 ASIL C for the single chip and ISO 26262 ASIL D for the dual chip versions.Therefore, all products are ready for applications with highest functional safety requirements.

Our TLE5014 magnetic angle sensor family is available as single and dual die products.All sensors out of this family come pre-configured and pre-calibrated as plug-and-play sensors – and are thus easy-to-use. Today, customers can choose between the following interfaces.TLE5014S16(D): SENT/PWM/SPC – SENT preconfiguredTLE5014P16(D): SENT/PWM/SPC – PWM preconfiguredTLE5014C16(D): SENT/PWM/SPC – SPC preconfiguredTLE5014SP16(D): SPIOn top of those protocol options, the sensor configuration can be adapted to any kind of application setup via a programmable E²PROM.TLE5014 magnetic angle sensors meet ISO 26262 ASIL C for the single chip and ISO 26262 ASIL D for the dual chip versions.Therefore, all products are ready for applications with highest functional safety requirements.