With our latest Infineon KP226E3408 the broad family of Infineon Turbo MAP sensors is further extended. This new analog Turbo MAP sensor is characterized by its improved accuracy pressure sensing. Our automotive qualified KP226E3408 MAP sensor with its improved accuracy of 3.8 kPa is the perfect fit for automotive applications (such as ECU), but also suitable for industrial and consumer applications due to its high accuracy, high sensitivity and safety features.

The Infineon KP264 is a miniaturized barometric air pressure sensor IC based on a capacitive principle. It is surface micromachined with a monolithic integrated signal conditioning circuit implemented in BiCMOS technology. Highly accurate, highly sensitive and reliable features makes the sensor the ideal fit for advanced automotive applications, but also industrial and consumer.The sensor converts a pressure into a 10-bit digital value and sends the information via the SPI interface. In addition, a temperature sensor is integrated on chip. Based on the received SPI command, the 10-bit temperature information will be transmitted via the SPI interface. A special reliability feature is the integrated diagnostic mode, which allows testing the sensor cells as well as the signal path. This diagnosis can be simply triggered with a SPI command. Our sensor has been primarily developed for measuring barometric air pressure, but can also be used in other application fields.

The KP235 is a miniaturized Analog Barometric Air Pressure Sensor IC based on a capacitive principle. It is surface micromachined with a monolithic integrated signal conditioning circuit implemented in BiCMOS technology. The sensor converts a pressure into an analog output signal. The calibrated transfer function converts a pressure of 40 kPa to 115 kPa into a voltage range of 0.5 V to 4.5 V. The chip is packaged in a “green” SMD housing. The sensor has been primarily developed for measuring barometric air pressure, but can also be used in other application fields. The high accuracy and the high sensitivity of the device makes it a perfect fit for advanced automotive applications as well as in industrial and consumer applications.

The KP229E3111 is a miniaturized Analog Manifold Air Pressure Sensor IC based on a capacitive principle. It is surface micromachined with a monolithic integrated signal conditioning circuit implemented in BiCMOS technology.The sensor converts a pressure into an analog output signal. The calibrated transfer function converts a pressure of 20 kPa to 300 kPa into a voltage range of 0.40 V to 4.65 V.The chip is packaged in a “green” SMD housing. The sensor has been primarily developed for measuring manifold air pressure, but can also be used in other application fields. The high accuracy and the high sensitivity of the device makes it a perfect fit for advanced automotive applications as well as in industrial and consumer applications.

The KP216H1416 is a miniaturized Analog Manifold Air Pressure Sensor IC based on a capacitive principle. It is surface micromachined with a monolithic integrated signal conditioning circuit implemented in BiCMOS technology. The sensor converts a pressure into an analog output signal. The calibrated transfer function converts a pressure of 50 kPa to 150 kPa into a voltage range of 0.5 V to 4.5 V. The chip is packaged in a “green” SMD housing. The sensor has been primarily developed for measuring manifold air pressure, but can also be used in other application fields. The high accuracy and the high sensitivity of the device makes it a perfect fit for advanced automotive applications as well as in industrial and consumer applications.

The KP215F1701 is a miniaturized Analog Manifold Air Pressure Sensor IC based on a capacitive principle. It is surface micromachined with a monolithic integrated signal conditioning circuit implemented in BiCMOS technology. The sensor converts a pressure into an analog output signal. The calibrated transfer function converts a pressure of 10 kPa to 115 kPa into a voltage range of 0.4 V to 4.65 V. The chip is packaged in a “green” SMD housing. The sensor has been primarily developed for measuring manifold air pressure, but can also be used in other application fields. The high accuracy and the high sensitivity of the device makes it a perfect fit for advanced automotive applications as well as in industrial and consumer applications.

Infineon´s KP276A1201 is a miniaturized digital absolute pressure sensor based on a capacitive principle. It is surface micromachined with a monolithic integrated signal conditioning circuit implemented in BiCMOS technology. Our sensor converts a pressure into a 12-bit digital value and sends the information via the SENT protocol (SAE J2716 revised April 2016). In addition, an interface for an external negative temperature coefficient (NTC) temperature sensor is provided. The temperature information given by the NTC is also digitized into a 12-bit value and transmitted with the SENT protocol. A special safety feature is the integrated diagnostic mode, which allows testing of the sensor cells as well as the signal path. This diagnosis is triggered by powering the device. The sensor was primarily developed for measuring manifold air pressure, but can also be used in other application fields.

The Infineon Manifold Air Pressure (MAP) sensor family is growing with its two new analog MAP sensors -KP212F1701 and KP212K1409 - both dedicated for 2-wheeler market.Just like all other XENSIVTM Manifold Air Pressure sensor families, KP212 is specified by its proven high quality with a DPM rate lower than 0,3 dpm. These automotive qualified analog pressure sensors are characterized by their high precision pressure sensing, ± 1.4 kPa at KP212F1701. The sensors offer dedicated transfer functions for 2-wheelers.The calibrated transfer function of KP212F1701 converts a pressure of 10 kPa to 115 kPa into a voltage range of 0.4 V to 4.65 V.Furthermore a specific feature of KP212 is its temperature range. With a range of -40°C to 125°C, KP212 is perfectly addressing typical 2-wheeler requirements.All these features make it a highlight product for 2-wheelers: KP212 enables lower CO2 emissions, as well as lower fuel consumption, which makes it the right fit product worldwide to fulfill emission regulation requirements such as CN6 and Bharat 6. Of course these sensors can also be used in industrial control, consumer application and medical applications.Now discover the XENSIVTM latest analog MAP sensorsKP212K1409 with pressure sensing ± 1.0 kPaKP212F1701 with pressure sensing ± 1.4 kPaProfit from KP212 for 2-wheelers: For lower emission, better combustion and higher efficiency!

The Infineon Manifold Air Pressure (MAP) sensor family is growing with its two new analog MAP sensors -KP212F1701 and KP212K1409 - both dedicated for 2-wheeler market.Just like all other XENSIVTM Manifold Air Pressure sensor families, KP212 is specified by its proven high quality with a DPM rate lower than 0,3 dpm. These automotive qualified analog pressure sensors are characterized by their high precision pressure sensing, ± 1.0 kPa at KP212K1409. The sensors offer dedicated transfer functions for 2-wheelers.The calibrated transfer function of KP212K1409 converts a pressure of 15 kPa to 115 kPa into a voltage range of 0.5 V to 4.5 V.Furthermore a specific feature of KP212 is its temperature range. With a range of -40°C to 125°C, KP212 is perfectly addressing typical 2-wheeler requirements.All these features make it a highlight product for 2-wheelers: KP212 enables lower CO2 emissions, as well as lower fuel consumption, which makes it the right fit product worldwide to fulfill emission regulation requirements such as CN6 and Bharat 6. Of course these sensors can also be used in industrial control, consumer application and medical applications.Now discover the XENSIVTM latest analog MAP sensorsKP212K1409 with pressure sensing ± 1.0 kPaKP212F1701 with pressure sensing ± 1.4 kPaProfit from KP212 for 2-wheelers: For lower emission, better combustion and higher efficiency!

The KP214N2611 is a miniaturized Analog Manifold Air Pressure Sensor IC based on a capacitive principle. It is surface micromachined with a monolithic integrated signal conditioning circuit implemented in BiCMOS technology. The sensor converts a pressure into an analog output signal. The calibrated transfer function converts a pressure of 15 kPa to 115 kPa into a voltage range of 0.18 V to 4.65 V. The chip is packaged in a “green” SMD housing. The sensor has been primarily developed for measuring manifold air pressure, but can also be used in other application fields. The high accuracy and the high sensitivity of the device makes it a perfect fit for advanced automotive applications as well as in industrial and consumer applications.