Our TLE5014 magnetic angle sensor family is available as single and dual die products.All sensors out of this family come pre-configured and pre-calibrated as plug-and-play sensors – and are thus easy-to-use. Today, customers can choose between the following interfaces.TLE5014S16(D): SENT/PWM/SPC – SENT preconfiguredTLE5014P16(D): SENT/PWM/SPC – PWM preconfiguredTLE5014C16(D): SENT/PWM/SPC – SPC preconfiguredTLE5014SP16(D): SPIOn top of those protocol options, the sensor configuration can be adapted to any kind of application setup via a programmable E²PROM.TLE5014 magnetic angle sensors meet ISO 26262 ASIL C for the single chip and ISO 26262 ASIL D for the dual chip versions.Therefore, all products are ready for applications with highest functional safety requirements.

Our TLE5014 magnetic angle sensor family is available as single and dual die products.All sensors out of this family come pre-configured and pre-calibrated as plug-and-play sensors – and are thus easy-to-use. Today, customers can choose between the following interfaces.TLE5014S16(D): SENT/PWM/SPC – SENT preconfiguredTLE5014P16(D): SENT/PWM/SPC – PWM preconfiguredTLE5014C16(D): SENT/PWM/SPC – SPC preconfiguredTLE5014SP16(D): SPIOn top of those protocol options, the sensor configuration can be adapted to any kind of application setup via a programmable E²PROM.TLE5014 magnetic angle sensors meet ISO 26262 ASIL C for the single chip and ISO 26262 ASIL D for the dual chip versions.Therefore, all products are ready for applications with highest functional safety requirements.

Our TLE5014 magnetic angle sensor family is available as single and dual die products.All sensors out of this family come pre-configured and pre-calibrated as plug-and-play sensors – and are thus easy-to-use. Today, customers can choose between the following interfaces.TLE5014S16(D): SENT/PWM/SPC – SENT preconfiguredTLE5014P16(D): SENT/PWM/SPC – PWM preconfiguredTLE5014C16(D): SENT/PWM/SPC – SPC preconfiguredTLE5014SP16(D): SPIOn top of those protocol options, the sensor configuration can be adapted to any kind of application setup via a programmable E²PROM.TLE5014 magnetic angle sensors meet ISO 26262 ASIL C for the single chip and ISO 26262 ASIL D for the dual chip versions.Therefore, all products are ready for applications with highest functional safety requirements.

The TLE5x0916(D) angle sensors are designed for angular position sensing in safety critical automotive and non- automotive applications. Their high accuracy combined with short propagation delay make especially the GMR sensor variants suitable for systems with high speeds and high accuracy demands such as brushless DC (BLDC) motors for actuators and electric power steering systems (EPS). The AMR sensor variants with their typically accuracy of 0.1° fit for systems with high speeds and high accuracy demands such as pedals, levers or brushless DC (BLDC) motors with an even number of pole pairs.This magnetic sensor offers 5.0V, single die GMR technology and is with TCO (Temperature Compensation Offset).The following derivatives of the TLE5x09A16(D) sensor family are available:Single die GMR: TLE5009A16Dual die GMR: TLE5009A16DSingle die AMR: TLE5109A16Dual die AMR: TLE5109A16DDual die AMR (bottom) / GMR (top): TLE5309DFunctional SafetySafety Manual and Safety Analysis Summary Report available on request.

Infineon´s magnetic angle sensor is available as single die version (TLE5x09A16) and dual die version (TLE5x09A16D) for safety applications that require redundancy. The two versions are pin-compatible for easy scalability. In the dual die TLE5x09A16D, both sensor dies are supplied independently by separate supply and ground pins. It comes in a PG-TSOD-16 package.This XENSIVTM magnetic sensor offers 3.3V, single die GMR technology and is with TCO (Temperature Compensation Offset).The following derivatives of the TLE5x09A16(D) sensor family are available:Single die GMR: TLE5009A16Dual die GMR: TLE5009A16DSingle die AMR: TLE5109A16Dual die AMR: TLE5109A16DDual die AMR (bottom) / GMR (top): TLE5309DFunctional SafetySafety Manual and Safety Analysis Summary Report available on request.

Infineon´s XENSIVTM angle sensor is available as single die version (TLE5x09A16) and dual die version (TLE5x09A16D) for safety applications that require redundancy. The two versions are pin-compatible for easy scalability. In the dual die TLE5x09A16D, both sensor dies are supplied independently by separate supply and ground pins.This magnetic sensor offers 3.3V, single die GMR technology and is without TCO (Temperature Compensation Offset).The following derivatives of the TLE5x09A16(D) sensor family are available:Single die GMR: TLE5009A16Dual die GMR: TLE5009A16DSingle die AMR: TLE5109A16Dual die AMR: TLE5109A16DDual die AMR (bottom) / GMR (top): TLE5309DFunctional SafetySafety Manual and Safety Analysis Summary Report available on request.

Infineon´s TLE5109 products are available as single and dual die versions and at two different supply voltage options, optimized for 3.3V as well as 5V. All products come inside the TDSO-16 Package. The whole TLE5109 family is ready for ISO26262, targeting ASIL D for dual die sensors.This makes the products a perfect fit for both automotive as well as industrial safety applications.The TLE5109 product family covers Infineon Technologies AG’s new ultra-precise, fast analog AMR-based angle sensors. TLE5109 products are the right fit for any kind of ultra-precise and fast 180° angle measurement application. The sensors’ application fields range from BLDC motor position applications for e.g. pumps, wipers or brakes, position measurements of valves, flaps or pedals to steering angle applications with the highest functional safety requirements. Built within a 180° sensing technology, the new TLE509 sensors nevertheless can be used for 360° for motors with an even number of pole pairs.

Adding the AMR-based TLE5109 family to the already existing GMR-based TLE5009 and diverse TLE5309 products, Infineon Technologies AG is also increasing the design-in flexibility for customers. Having all the same footprint and interfaces customers have the option to start designs with one product family – and easily change from one to the other product family as both pinning as well as interfaces of all products.XENSIVTM TLE5109 products are available as single and dual die versions and at two different supply voltage options, optimized for 3.3V(E1210) as well as 5V(E2210). All products come inside the TDSO-16 Package. The whole TLE5109 family is ready for ISO26262, targeting ASIL D for dual die sensors. This makes the products a perfect fit for both automotive as well as industrial safety applications.

Infineon´s TLE5109 products are available as single and dual die versions and at two different supply voltage options, optimized for 3.3V(E1210) as well as 5V(E2210). All products come inside the TDSO-16 Package. The whole TLE5109 family is ready for ISO 26262, targeting ASIL D for dual die sensors. This makes the products a perfect fit for both automotive as well as industrial safety applications.TLE5109 products can be used within a very broad magnetic field range, starting at 10 mT reaching up to more than 500mT. One major benefit of the Infineon iAMR technology is its high angle accuracy, reaching typical values of 0.1° angle error only for magnet fields above 20mT only. At low magnetic fields of 10…20 mT, TLE5109 products are outperforming the market due to their benchmark small typical angle error of only 0.2°. Reaching such low error values at low magnetic fields, TLE5109 products enable very cost-efficient systems as customers can use smaller and cheaper magnets for reaching the same system accuracy.

Infineon´s TLE5109 product family covers Infineon Technologies AG’s new ultra-precise, fast analog AMR-based angle sensors. TLE5109 products are the right fit for any kind of ultra-precise and fast 180° angle measurement application. The sensors’ application fields range from BLDC motor position applications for e.g. pumps, wipers or brakes, position measurements of valves, flaps or pedals to steering angle applications with the highest functional safety requirements. Built within a 180° sensing technology, the new TLE509 sensors nevertheless can be used for 360° for motors with an even number of pole pairs.Adding the AMR-based TLE5109 family to the already existing GMR-based TLE5009 and diverse TLE5309 products, Infineon Technologies AG is also increasing the design-in flexibility for customers. The quick and easy product version interchange is enabled due to the identical pin-configuration and interfaces of all TLE5x09 sensors.The whole TLE5109 family is ready for ISO 26262, targeting ASIL D for dual die sensors.This makes the products a perfect fit for both automotive as well as industrial safety applications.