Infineon
LITIX™ Power
Infineon
TLD5045EJXUMA1
The TLD5045 is a highly integrated smart LED buck controller with built in protection functions. The main function of this device is to drive single or multiple series connected LEDs efficiently from a voltage source higher than the LED forward voltage by regulating a constant LED current. The constant current regulation is especially beneficial for LED color accuracy and long LED lifetime. The built in freewheeling diode and switching transistor with current sense requires less external components and saves system costs. High flexibility is achieved by placing low powerresistors to adjust output currents up to 700mA and the regulator switching frequency (typ. 200kHz). An integrated PWM dimming engine provides a LED dimming function by placing a simple RC network to GND. This feature is dedicated for decentralized light modules without microcontroller involvement. In addition to that an integrated status pull down transistor can be used to simulate a minimum current flow for decentralized modules to avoid a wrong open load detection by a highside switch located in the body control module (BCM).
Request Model
Infineon
TLD5095ELXUMA1
The TLD 5095EL and the TLD 5098EL are two smart LED boost controllers with built in protection and diagnostic features. The main function of these devices is to step-up (boost) the output voltage and regulate a constant LED current. The TLD 5095EL offers a status pin for diagnostic purpose the TL
Request Model
Infineon
TLD5097ELXUMA1
The TLD5097EL is a smart LED boost controllers with built in protection and diagnostic features. The main function of these devices is to step-up (boost) the output voltage and regulate a constant LED current. The TLD5097EL offers a status pin for diagnostic purpose and a set pin to adjust the average LED current so called analog dimming.
Request Model
Infineon
TLD5098ELXUMA1
The TLD 5095EL and the TLD 5098EL are two smart LED boost controllers with built in protection and diagnostic features. The main function of these devices is to step-up (boost) the output voltage and regulate a constant LED current. The TLD 5095EL offers a status pin for diagnostic purpose the TLD 5098EL a set pin to adjust the average LED current so called analog dimming.
Request Model