1. Manufacturers
  2. TE Connectivity
  3. Connectors
  4. Lighting Connectors
  5. LED Holders

TE Connectivity


LED Holders

An LED holder is a circular receptacle or socket that enables a Chip-on-Board (CoB) LED to be mechanically secured, electrically connected and pressed to a heatsink. Our LUMAWISE LED holders remove the need to solder allowing the LED to be directly attached to a heatsink using a 2* M3 screws at a standardized screw-pitch. In addition, they always have an optics landing zone at the same distance from the secondary optics.

TE Connectivity
1-2316511-2
LUMAWISE DRIVE Z50, DALI, 0.5A, 20X24
Request Model
TE Connectivity
1-2316511-3
LUMAWISE DRIVE Z50, DALI, 0.5A, 19X19
Request Model
TE Connectivity
1-2316511-4
LUMAWISE DRIVE Z50, DALI, 0.5A, 16X19
Request Model
TE Connectivity
1-2325807-2
LUMAWISE Z45 LED HOLDER 19X19
Models Available
TE Connectivity
1-2325807-3
LUMAWISE Z45 LED HOLDER 19X19
Models Available
TE Connectivity
1-2325811-2
LUMAWISE Z45 LED HOLDER 20X24
Models Available
TE Connectivity
1-2325811-3
LUMAWISE Z45 LED HOLDER 20X24
Models Available
TE Connectivity
2-2154857-1
Socket, SCALABLE LED, 2PC, Gold, w/TS
Models Available
TE Connectivity
2-2154857-2
Socket, SCALABLE LED, 2PC, Gold, w/TS
Models Available
TE Connectivity
2-2154857-3
Socket, SCALABLE LED, 2PC, Gold, w/TS
Models Available