1. Manufacturers
  2. TE Connectivity
  3. Connectors
  4. Lighting Connectors
  5. LED Holders

TE Connectivity


LED Holders

An LED holder is a circular receptacle or socket that enables a Chip-on-Board (CoB) LED to be mechanically secured, electrically connected and pressed to a heatsink. Our LUMAWISE LED holders remove the need to solder allowing the LED to be directly attached to a heatsink using a 2* M3 screws at a standardized screw-pitch. In addition, they always have an optics landing zone at the same distance from the secondary optics.

TE Connectivity
1-2213929-4
Z35 MINI LED HDR 19*19 (A) CSK, NO TAPE
Models Available
TE Connectivity
1-2213929-5
Z35 MINI LED HDR 16*19 PH, NO TAPE
Models Available
TE Connectivity
1-2213929-6
Z35 MINI LED HDR 16*19 CSK, NO TAPE
Models Available
TE Connectivity
1-2213929-7
Z35 MINI LED HDR 19*19 (B) PH, NO TAPE
Models Available
TE Connectivity
1-2213929-8
Z35 MINI LED HDR 19*19 (B) CSK, NO TAPE
Models Available
TE Connectivity
1-2316510-1
LUMAWISE DRIVE Z50, 0-10V, 0.5A, 24X24
Request Model
TE Connectivity
1-2316510-2
LUMAWISE DRIVE Z50, 0-10V, 0.5A, 20X24
Request Model
TE Connectivity
1-2316510-3
LUMAWISE DRIVE Z50, 0-10V, 0.5A, 19X19
Request Model
TE Connectivity
1-2316510-4
LUMAWISE DRIVE Z50, 0-10V, 0.5A, 16X19
Request Model
TE Connectivity
1-2316511-1
LUMAWISE DRIVE Z50, DALI, 0.5A, 24X24
Request Model