Ex i measuring transducer power supply and input signal conditioner, HART-transparent. Transfers supplied or active 0/4…20 mA electrically isolated signals from the Ex area to two loads in the safe area. 4-way electrical isolation, screw connection, SIL, PL.

Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.

Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.

Ex i-Repeater power supply for isolating and transmitting 0 mA / 4 mA ... 20 mA intrinsically safe field signals from the Ex area to 1 load in the safe area. HART-transparent, no-load voltage: 15 V AC/DC, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection

Ex i-Repeater power supply for isolating and transmitting 0 mA / 4 mA ... 20 mA intrinsically safe field signals from the Ex area to 1 load in the safe area. HART-transparent, no-load voltage: 15 V AC/DC, Standard configuration, Line fault detection, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection

Ex i-Output signal conditioner for isolating and transmitting 0 mA / 4 mA ... 20 mA signals from the controller to an intrinsically safe load in the Ex area. HART-transparent, no-load voltage: 27 V AC/DC, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 3, Screw connection

Ex i-Output signal conditioner for isolating and transmitting 0 mA / 4 mA ... 20 mA signals from the controller to an intrinsically safe load in the Ex area. HART-transparent, no-load voltage: 27 V AC/DC, Standard configuration, Safety Integrity Level (SIL, IEC 61508): 3, Push-in connection