1. Infineon
  2. Sensor
  3. Magnetic Position Sensor
  4. Linear Hall IC

Infineon TLE4998S4HALA1

The linear Hall IC TLE4998S has been designed specifically to meet the requirements of highly accurate rotation and position detection, as well as for current measurement applications. The sensor provides a digital SENT signal based on the SAE J2716 standard, which consists of a sequence of pulses. Each transmission has a constant number of nibbles containing the Hall value, the temperature, and status information of the sensor. The output stage is an open-drain driver pulling the output pin to low only. Therefore, the high level needs to be obtained by an external pull-up resistor. This output type has the advantage that the receiver may use an even lower supply voltage (e.g. 3.3 V). In this case the pull-up resistor must be connected to the given receiver supply. The IC is produced in BiCMOS technology with high voltage capability, and it also has reverse-polarity protection.Digital signal processing using a 16-bit DSP architecture together with digital temperature compensation guarantee excellent long-time stability compared to analog compensation methods. While the overall resolution is 16 bits, some internal stages work with resolutions up to 20 bits.
No Exact Match Found
Here are some similar part numbers from the same manufacturer
TLE4998S8DXUMA1
Infineon
Select
TLE4998S8XUMA1
Infineon
Select
Don't See your Part?
Additional Info
Datasheets
Pricing & Availability
Tech Specs

Want to learn more?

Discover the Advantage: Electronic Design From Board to System with Altair® PollEx™ and Altair® SimLab®

View on Altair.com
Free Online PCB CAD Library

Welcome to the worlds largest verified PCB CAD library.

Access our free library containing millions of symbols, footprints, and 3D models from manufacturers such as TI, Analog Devices, TE, Maxim, Power Integrations, and more.