1. Infineon
  2. Sensor
  3. Magnetic Position Sensor
  4. Linear Hall IC

Infineon TLE4998S3CHAMA1

The linear Hall IC TLE4998S3C has been designed specifically to meet the requirements of highly accurate rotation and position detection, as well as for current measurement applications. Two capacitors are integrated on the lead frame, making this sensor especially suitable for demanding EMC requirements .The sensor provides a digital PWM signal, which is ideally suited for direct decoding by any unit measuring a duty cycle of a rectangular signal (usually a timer/capture unit in a microcontroller). Furthermore, it is possible to attach an external lowpass filter, which allows an A/D conversion using the sensor supply voltage as a reference. The output stage is an open-drain driver pulling the output pad to low only. Therefore, the high level must be obtained by an external pull-up resistor. This output type has the advantage that the receiver may use even a lower supply voltage (e.g. 3.3 V). In this case, the pull-up resistor must be connected to the given receiver supply.The IC is produced in BiCMOS technology with high voltage capability, also providing reverse polarity protection. Digital signal processing, using a 16-bit DSP architecture together with digital temperature compensation, guarantees excellent long-time stability as compared to analog compensation methods. While the overall resolution is 16 bits, some internal stages work with resolutions up to 20 bits.

Symbol

No Symbol Available

Footprint

No Footprint Available

3D Model

No 3D Model Available

Symbol Views

(not all views will be available for every part)

Normal: Standard and most popular representation of schematic symbol

ALT_1 (IEEE view): Symbol representation in a way that is more graphical in explaining what the purpose of each pin is. For connectors and most discretes (as we use these views) it is simply an alternate view for people to use depending on the situation. For instance connectors can be generally an input, an output or neither. Resistors can be vertical or horizontal.

ALT_2 (demorgan): Demorgan is a name for an equivalent Gate structure. so for instance an AND gate and an OR gate can be represented by its Demorgan equivalent of a NOR gate.

Sometimes a device is fractured into multiple symbols (often for high pin count parts). If that is the case, you can preview the different symbols that make up the device by selecting them in this drop down.

Footprint Views

(not all views will be available for every part)

Basic: Our standard footprint view showing, contact area, pin number, top, top assembly

Detailed: Additional info to help you evaluate the part and the footprint including: dimension, silkscreen, soldermask, and solderpaste

PinDetail: Highlights the pin to pad contact area dimensions

Displays min/typ/max pad sizes for footprint per IPC specification (not all sizes will be available for every part)

Want to learn more?

Discover the Advantage: Electronic Design From Board to System with Altair® PollEx™ and Alair® SimLab®

View on Altair.com
Free Online PCB CAD Library

Welcome to the worlds largest verified PCB CAD library.

Access our free library containing millions of symbols, footprints, and 3D models from manufacturers such as TI, Analog Devices, TE, Maxim, Power Integrations, and more.