1. Infineon
  2. Sensor
  3. Magnetic Sensors
  4. Magnetic Speed Sensors

Infineon TLE4988CXTNM28HAMA1

The Infineon XENSIV™ TLE4988C products feature advanced camshaft sensing performance and improved application adaption. One major benefit of the advanced sensor performance is the reduced dependence from rare-earth backbias magnets for module manufacturers. The TLE4988C has proven right performance with a ferrite backbias magnet for all relevant parameters such as phase jitter, phase accuracy or speed effect across key temperature, air gap and rpm ranges.With automatic in-car calibration a most accurate sensing in real application environment is ensured addressing tolerances of ferromagnetic wheels and magnetic encoders, as well as mounting tolerances of the sensor. The TLE4988C products furthermore allow to compensate for thermal or mechanical stress applied in the module manufacturing process. The embedded EEPROM can also feature a unique chip ID to allow logistic traceability (on request). A new high speed digital I/F allows a fast read out of registers for diagnosis or test purposes.Infineon´s TLE4988C products are available optimized for the use with three different backbias magnet materials, such as Fe (link to), SmCo (link to) and NdFe. All products come inside the well established Camshaftsensor package PG-SSO-3-52 with Sn plating, 3-wire voltage I/F and increased supply/output capacitance of 220/1,8nF for higher EMC robustness. With unchanged mechanical specification of the package a high backward compatibility with predecessor products from Infineon is given and design switch cost are minimized.
Built by Ultra Librarian

Built & Verified by Ultra Librarian. Learn more about our process here.

Symbol

Footprint

3D Model

No 3D Model Available

Symbol Views

(not all views will be available for every part)

Normal: Standard and most popular representation of schematic symbol

ALT_1 (IEEE view): Symbol representation in a way that is more graphical in explaining what the purpose of each pin is. For connectors and most discretes (as we use these views) it is simply an alternate view for people to use depending on the situation. For instance connectors can be generally an input, an output or neither. Resistors can be vertical or horizontal.

ALT_2 (demorgan): Demorgan is a name for an equivalent Gate structure. so for instance an AND gate and an OR gate can be represented by its Demorgan equivalent of a NOR gate.

Sometimes a device is fractured into multiple symbols (often for high pin count parts). If that is the case, you can preview the different symbols that make up the device by selecting them in this drop down.

Footprint Views

(not all views will be available for every part)

Basic: Our standard footprint view showing, contact area, pin number, top, top assembly

Detailed: Additional info to help you evaluate the part and the footprint including: dimension, silkscreen, soldermask, and solderpaste

PinDetail: Highlights the pin to pad contact area dimensions

Displays min/typ/max pad sizes for footprint per IPC specification (not all sizes will be available for every part)

Back to Preview
Maximum Number of selections hit

Select Your CAD Format

Symbol Pin Ordering
Footprint Units
Free Online PCB CAD Library

Welcome to the worlds largest verified PCB CAD library.

Access our free library containing millions of symbols, footprints, and 3D models from manufacturers such as TI, Analog Devices, TE, Maxim, Power Integrations, and more.